Jet Mixer-جت میکسر

Hits : 502   |      

Liquid Jet Mixers are jet pumps similar to the water jet pumps used to mix and circulate liquids. The jet mixer has lateral slots, where the surrounding medium is sucked in. Due to the high turbulence in the diffuser the result is an intimate mixing of the motive and suction fluid. The liquid mixture emerging from the jet mixer spreads out in conical form and entrains more liquid from its surroundings.

Liquid Jet Mixers


Liquid Jet Mixers are jet pumps similar to the water jet pumps used to mix and circulate liquids. The jet mixer has lateral slots, where the surrounding medium is sucked in. Due to the high turbulence in the diffuser the result is an intimate mixing of the motive and suction fluid. The liquid mixture emerging from the jet mixer spreads out in conical form and entrains more . liquid from its surroundings.

 

jet mixer - karajet.com 

For learning more , we suggest you to read our Catalog here:

KARAJET LIQUID Jet mixer Catalog

Advantages


Automatic control
Corrosion and erosion resistant
Easy to install
Low cost
Maintenance free
Simple and reliable
Very low wear because there are no movable parts
Wide range of materials such as steal; stainless steel; cast iron; bronze; Teflon and graphite

Applications

Mixing and circulaating of fluids in storage tnks; vessels or basins

 

jet mixer - karajet.com

Range of Operation


The viscosity of the circulation fluid must not be too high. Otherwise a sufficient mixing effect can not be guaranteed. As a rule, jet mixers can be used in all cases where the liquid to be mixed can still be supplied by a centrifugal pump.
The driving medium has to be free of bigger particles, to avoid the clogging of the driving nozzle.

 

jet mixer application- karajet.com

 

Installation Requirements


Several mixers in a vessel yield a better mixture and homogeneity. The approximate number of mixers necessary may be found from the following rule of thumb:
High tanks: 100 - 400 m³/per mixer
Low profile tanks and basins: 30 - 100 m³/per mixer
The mixers should be more than 1.5 m below the liquid level in case of tendency to foam.
To obtain good operation even with low liquid level, jet mixers should be installed at the deepest possible point.
For establishing the number of mixers required, the following criteria is taken into account:
Geometry and size of vessel or tank
Type of liquid to be mixed
Mixing time
Maximum and minimum liquid levels